상품명 | 항온항습기 옵션 Option(Temp & Humi Control Chamber) |
---|---|
판매가 | 1,166,000원 (VAT 별도) |
배송 | 택배가 불가능한(고중량 제품) 직납운임비 지역별차등 |
배송비 | 5,500원 (100,000원 이상 구매 시 무료) |
SNS 상품홍보 | |
---|
옵션선택 | |
---|---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드Controller
Group | Specification | ||
---|---|---|---|
Display | Display | 5.7” TFT-LCD | |
Screen Resolution | 640(W) x 480(H) | ||
Language | KOR/ENG/JPN, KOR/ENG/CHN, KOR/ENG/RUS | ||
Font | 3 Font (HEAD/NORM/ART | ||
Start Page | Support user`s start page | ||
User Screen | 16 customized user screen for screen saver | ||
Mount Method | Panel mount, VESA mount(MIS-D 75) | ||
Control Mode | TEMP 1CH : Heat and Cool Support | ||
Max Channel | 1 Channel | ||
Pattern & Segments | 80pattern / Max 1200 segments , Max 999hour 59Min 59Sec can be set | ||
Input | TC | K, J, E, T, R, B, S, L, N, U, W, PL, C, | |
RTD | Pt100(JIS/IEC), JPt100(JIS) | ||
Analog Voltage Input | 0.4V~2V DC, 1~5V DC, 0~10V, -10~20 mV DC,1~100 mV DC(4~20 mA , 0~20 mA, External Resistance 250Ω, 500Ω) | ||
Output | Control Output | 1 Channel MV(0~100%) | |
Current Output | 4~20mA DC(Load Resistance : Max 600Ω) | ||
Voltage Output | 24V DC(pulse width : Minimum5ms) | ||
Transmission Output | 1 Channel (PV, SP, MV) | ||
Digital Input | Contact Type | RUN/STOP/HOLD/STEP by DI, Pattern Number, Delay time of detecting DI error, Trouble Input by DI, Available to customize DI error | |
Contact capacity | Max 12V DC, 10mA | ||
Digital Output | Relay | C contact | Normal Open 30V DC 5A, 250V AC 5A Normal Close 30V DC 1, 250V AC 2A |
A contact | Normal Open 30V DC 3A, 250V AC 3A | ||
Open Collector | ON voltage across contacts at less than 2V, the leakage currentless than 100 ㎂ | ||
Sampling Time | 250ms | ||
Accuracy | ±0.1% of FS ±1 digit | ||
PID Control | PID group | 6 group(Zone PID 6 group or Deviation PID 1 group or Seg PID 6 group) | |
PID type | Zone PID, Dev PID, Seg PID | ||
Communication | Interface | Flexible to change between RS485/RS232C by Dip switch, Max. 31 nodes. | |
Protocol | PC Link(Checksum), MODBUS(RTU,ASCII), Sync-Master(CH1,CH2 selectable) | ||
Speed | Max 115,200 bps, Support Ethernet | ||
Data Back-Up | Object | SDCard, MMC Card(FAT32 format) | |
Functions | Back-up and restore data of Program Pattern / Parameter Settings, and SP/PV/MV vaule | ||
Power Supply | Power | 24VDC | |
Power Consumption | 22VA Max | ||
Operating environment | - | ||
Weight | - |
Options
Suffix Code | ||
---|---|---|
Model | Code | Information |
GR200 | Graphic recorder(applied touch panel function) 145(W)×145(H)mm / 5.71x5.71'' | |
Input channel | 2 | 2 channels |
4 | 4 channels | |
8 | 8 channels | |
12 | 12 channels |
Model | GR200 |
---|---|
Number of channels | 2, 4, 8, 12 (Refer to the type configuration) |
Input type | 2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 VDC (-10 - 20 mV, 0 - 100 mV, 1 - 5V, 0 - 30 V) |
Sampling period | 250 ㎳ |
Current to measure the thermoresistor (RTD) | About 0.21 ㎃ |
Input resistor | Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁ |
Allowable wiring resistor | Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 - .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀ |
Impact of the wiring resistor | Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors) |
Allowable input voltage | Thermocouple : Less than ±10 V DC, VDC : Less than ±33 V DC |
Degree | ±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ※ Refer to the input table |
The error in the reference junction compensation (RJC) | ±2.0 ℃ (0 ~ 50 ℃) |
Sensor short detection (Burn-out) | UP-Scale for the short |
Options
Record accuracy | ±0.5%F.S. | |
---|---|---|
Alarm output | CH1(AL1, AL2), CH2(AL1, AL2) Relay out put(250 VAC/30 VDC 3 A 1 a) | |
Alarm output hysteresis | ON/OFF interval setting for alarm output: 1 to 999digit variable | |
Communication output | RS485 communication output(Modbus RTU protocol) | |
Set method | Setting by front keys | |
Sampling cycle | 500 ms/channel x 2 channels = 1000 ms | |
Dielectric strength | 2300 VAC 50/60 Hz for 1 min.(charging terminal of the other polarity) | |
Vibration | 0.75 mm amplitude at frequency of 10 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 1 hour | |
Relay life cycle | Mechanical: Over 5,000,000 operations, Electrical: Over 100,000 operations | |
Insulation resistance | Over 100 MΩ (at 500 VDC megger) | |
Noise resistance | Square shaped noise by noise simulator (pulse width 1 ㎲)±2 kV | |
Method | Direct thermal line print | |
Resolution | 8 dot/mm | |
Dots | 384 dot/Line | |
Life cycle | 50 km | |
Record | Graphic mode | • Record speed(recording paper speed): 10, 30, 60, 120, 240, 480, 940 mm/hour • Memo cycle: 30 s, 1 m, 5 m, 10 m, 15 m, 30 m, 1 h, 2 h, 3 h, 4 h, 8 h, 16 h, 24 h |
Digital mode | TEXT mode record cycle: 00 m 05 s to 99 m 59 s | |
Paper | Thermal Direct Receipt Paper (57 mm x 16 m) | |
Paper supply method | Clamshell Type | |
Language | Korean, English | |
Environment | Ambient temperature | 0 to 50 ℃, storage: -20 to 60 ℃ |
Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH | |
Approval | CE | |
Unit weight | Approx. 700 g |
게시물이 없습니다
게시물이 없습니다